# How to Prevent Overselling with Supplier-Owned Inventory

> Your store shows a copy of your supplier's stock, and the copy is always old. Close the gap with fresh feeds, early reservations and honest buffers.

Canonical URL: https://stackknack.com/blog/how-to-prevent-overselling-with-supplier-owned-inventory
Published: 2026-11-20
Author: StackKnack Team
Tags: Inventory, Supplier fulfillment

The store takes 6 orders against 4 real pans. Two customers will be told no.

When the stock you list belongs to your suppliers, you oversell because your store shows a copy of someone else's count, and that copy is always a little out of date. To prevent it, close three gaps: refresh each supplier's stock as often as the product sells, reserve a unit the moment an order is allocated rather than when the supplier confirms, and list slightly less than the supplier reports on fast sellers. Then decide in advance what happens when a supplier says no anyway.

This guide is for Shopify stores whose catalogue sits on suppliers' shelves. If your problem is one-of-one items you own, selling at the counter and online at the same time, read [how to stop overselling one-of-one items](/blog/how-to-stop-overselling-one-of-one-items) instead. The causes there are different.

Take a store that sells kitchenware on Shopify. It owns almost nothing. Two suppliers hold the stock, send a stock file a few times a day, and also sell the same products to other retailers. On a Friday evening a cast-iron pan is featured in a newsletter. The store shows 12 in stock. By the time the supplier sees the orders, it has 4 left, because other retailers sold the rest.

## Why does Shopify sell stock your supplier no longer has?

Shopify can only protect what it can see. In Shopify, available inventory is inventory that you can sell, and it is the number your storefront trusts. When that number comes from a supplier, it is a snapshot taken at the last refresh. Between refreshes, three things can change it without your store knowing:

- **The supplier sells the same units elsewhere.** Supplier stock is shared. Your feed says 12; their other customers do not wait for your next refresh.
- **Your own orders have not reached the supplier yet.** Until an order is passed on and accepted, the supplier is still counting that unit as free.
- **The count itself was wrong.** Damaged, miscounted or mis-picked units sit in a supplier's file until someone checks the shelf.


Supplier file says 12 pans
Other retailers sell 8 of them
Your store still shows 12, takes 6 orders
Supplier can ship 4. Two orders fail


None of this is a Shopify bug. It is what happens when the number on your product page is owned by someone who does not work for you.

## First, check that Shopify is allowed to say "sold out"

Before tuning feeds, rule out the setting that makes overselling a choice. Shopify lets you adjust inventory tracking to oversell, using the option "Continue selling when out of stock" on a product or variant. That option can only be selected when inventory tracking is turned on. It is useful for preorders. On supplier-held stock it means a stale feed can never stop a sale, even at zero.


Tracked, so the pan can show sold out.
Leave it on only for a labelled preorder.


Go through your supplier products and make sure:

- Inventory is tracked on every variant that a supplier holds.
- "Continue selling when out of stock" is off, unless you are deliberately taking preorders and say so on the page.
- Your apps and imports do not switch it back on when they update products.

If you sell in person through Shopify POS too, note that the setting does not apply to POS orders, so counter sales follow their own rules.

## How often should you refresh supplier stock?

There is no single right interval. The right refresh rate is the one where, between two refreshes, a product rarely sells more than the gap between what the feed says and what the supplier really has. In practice that means refreshing by sales speed, not on one schedule for the whole catalogue.

| Product | Refresh | Why |
| --- | --- | --- |
| Fast sellers and promoted items | As often as the supplier allows | A few hours of lag can be the whole stock |
| Steady sellers | A few times a day | Lag rarely matters, but daily is too slow on a busy day |
| Slow sellers | Daily | One sale between refreshes is unlikely |
| Anything in a newsletter, ad or sale | Before it goes out, then as often as possible | Demand jumps before the feed does |

Ask each supplier two questions: how often can they send stock, and does their file include units already promised to other customers? A supplier who sends "on hand" rather than "free to sell" is overstating what you can promise, every time.

## Reserve at allocation, not at confirmation

The second gap is inside your own process. An order arrives, you choose the supplier, and then the order waits for the supplier to accept it. If your stock count only drops when the supplier confirms, the next customer can buy the same unit in the meantime.

Shopify already handles this for its own locations. Committed inventory is units that are set aside and can't be sold, such as units in an unfulfilled order. Do the same for supplier stock: take the unit out of what you show the moment the order is allocated. If the supplier declines, put it back. A held unit you release later costs you nothing. A sold unit you cannot ship costs you a refund and a customer.

## How big should a safety buffer be?

A buffer means listing fewer units than the supplier reports, so that the gap between refreshes is absorbed by units you never offered. Shopify has a similar idea in its own inventory states: unavailable inventory is units set aside by apps or held for other reasons, and available inventory isn't committed or set aside as unavailable.

Size the buffer from the lag, not from a habit:


Take your own sales of the product in a typical refresh window. Add what you know of the supplier's other customers, if they will tell you.
If a product sells about three units between refreshes, list three fewer than the file says. Slow sellers rarely need a buffer at all.
A newsletter or a sale is a short burst. Raise the buffer for the burst and bring it back afterwards, or you will hide stock you could have sold.
On a supplier item with a low count, mark it sold out at one or two units rather than zero. The last unit in a shared feed is the one most likely to be gone already.
Count how many supplier declines each product caused. Products with no declines can lose their buffer; products with repeat declines need a faster feed, not only a bigger buffer.


A buffer is the cheap fix and a faster feed is the real one. If a product needs a buffer bigger than its usual daily sales, the feed is too slow for it.

## Worked example: the cast-iron pan

Back to the kitchenware store. The numbers are illustrative. The pan's supplier sends stock every six hours. On a normal day the store sells about one pan every two hours, so about three per refresh window. The supplier sells the same pan to other retailers.

Before the newsletter, the store lists every unit in the file and drops stock only when the supplier confirms. Here is the Friday:


Refresh. The supplier file says 12 and the store shows 12.
The newsletter goes out. The file still says 12, and the store's count falls only on confirmation.
The store takes 6 orders. The supplier's other retailers take 8.
Refresh. The file says 4 and the store shows 4. The supplier accepts 4 orders and declines 2.


Two customers are told their pan is not coming. Now run the same Friday with the three fixes: a two-hour refresh for the promoted pan, a unit held the moment each order is allocated, and a buffer of three raised to five for the newsletter.


File every six hours, no buffer
Two-hour refresh, early hold, buffer of 5


At the 10:00 am refresh the file already shows the supplier's other sales, and the buffer keeps the store from offering the last few units. The store sells fewer pans that morning than it would have taken orders for, but every order it takes ships. That is the trade a buffer makes: a few hidden units in exchange for no broken promises.

## What should happen when a supplier declines anyway?

Even with fresh feeds, some orders will reach a supplier who cannot fill them. Decide the response now, so it is a rule and not a scramble.


Move the order to them straight away and release the first hold.
Offer it first, such as a return. It is stock you already paid for.
Tell the customer the new date and let them cancel.
Cancel and refund promptly, then fix the listing.
Set a deadline and treat silence as a no.


In the US the shipping date you show is also a legal promise. The FTC's guide to its Mail, Internet, or Telephone Order Merchandise Rule says that with no shipment statement, you must have a reasonable basis for believing you can ship within 30 days. If you learn you cannot ship on time and decide to ship later, you must seek the customer's consent to the delay, with a way to cancel at your expense. If you cannot ship at all, you must promptly cancel the order and make a full refund. An oversold supplier item is not only an apology; it can start that clock.

We cover the waiting step in detail in [what to do when a supplier does not confirm an order](/blog/what-to-do-when-a-supplier-goes-quiet).

## When do you not need any of this?

If every unit you sell sits on a shelf you own and count, most of this guide does not apply: your own stock count is the truth, and Shopify's tracking with "Continue selling when out of stock" turned off does the work. A single supplier with a reliable, frequent feed and a small catalogue can often get by with the setting check and a modest buffer. The full routine pays off when several suppliers share stock with other retailers and you run promotions.



- Turn off "Continue selling when out of stock" on every supplier-held product, unless it is a labelled preorder.
- Refresh supplier stock by sales speed, and before every promotion.
- Ask each supplier whether their file shows free-to-sell stock or everything on hand.
- Take the unit out of your available count when you allocate the order, not when the supplier confirms.
- Hold back a buffer sized to sales between refreshes on fast sellers, and show sold out at a floor.
- Write down what happens on a decline: next supplier, your own shelf, new date or refund.



## How StackKnack helps

[StackKnack Relay](/relay) is for Shopify stores that sell stock held by their suppliers. It works on the gaps in this guide this way:

- **Fresher supplier stock:** Relay refreshes stock from connected suppliers so your team can work from current availability.
- **A hold for every order:** each order reserves a specific unit with a supplier, keeping the fulfillment commitment on record.
- **Your own shelf first:** if you have stock of your own, including returns, Relay can offer it first.
- **A decline is not a dead end:** a decline, or silence, moves the order to the next supplier. After the response window Relay moves it automatically and records what happened.
- **Suppliers confirm in one place:** they confirm orders, print the label and ship from the Relay supplier portal, with nothing to install.

What it does not do: it connects to Shopify today, and it does not find suppliers for you; the workflow starts with suppliers you already work with. The buffer sizes and refresh rules in this guide are decisions for your team, and a supplier's feed can only be as fresh as that supplier keeps it. If all your stock sits on your own shelf, you do not need Relay.

Selling stock that lives on your suppliers' shelves? [Bring us an example](/contact) of a product that oversold, and we will walk through how Relay would have handled it.
